#Gm tech 2 clone equivalent manual#
#Gm tech 2 clone equivalent software#
#Gm tech 2 clone equivalent code#

Opcom HQ clone for usually using with last opcom 150406b is good but not good coverage in this moment for all this new models. Here,В В is one of them you can go with.Need a tool+software for newest opel cars as Astra k, Corsa E Adam etc YouвЂ™d better but china knock-offs from a man of his word to trust in. These cards coming together with Tech 2 are not good sometimes. Could be corrupted software, or the card problem. If not totally solved, rewrite the card to 143 and 136. ItвЂ™s just better, but still needs to connect a few times. IMPORTANT: Sometimes, itвЂ™s just problem with candi, as when using on other cars without candi, itвЂ™s just perfect. After that you will be able to play with the Tech2 clone.

#Gm tech 2 clone equivalent code#

Make sure you want to look at the module.В You may be choosing body style В You may need the body code (sometimes the third character in the VIN)В You may also be asked about certain options, like ZL6.В They are on a tag in the glovebox.

Press the EXIT button until the Tech 2 goes back to the main menu.

Either turn the ignition key of the car, or start it (for a C6 there is not an вЂњonвЂќ).

There are two tests on the next screen, run them both.

At the tool options screen select F9, CANdi Diagnostics.

YouвЂ™ll get 12V from the DLC (now it takes me a half hour to find the вЂњDLC meansвЂќ Data Link Connector вЂњand is what we also call the OBD2 connector, so be prepared to be stumped by TLAвЂ™s (Three Letter Acronyms).

With the car ignition off, connect theВ GM Tech2В and CANdi module (which is now one long cable).

Suspect the pins arent making the best contact. I need to do this every now and then with my clone one. Plug it back in and make sure its real snug, then plug it into the obd port. Then, disconnect the connector leaving the candi adapter going to the OBD port. вЂњCANdi module was not detected for Tech2вЂќДЇirst, please make sure you plugged the candi adapter in to the car and the tech 2 before powering up How-toвЂ™s of CANDI module communication errors: How will you do with вЂњNO CANDI Communication EstablishedвЂќ? In the vent of a problemпјЊthe LED will be constantly illuminated. When functioning properly, CANdiвЂ™s LED flashes. The vehicle side connection remains unchanged using the existing adapter to interface between the Burndy connector and the SAE J1962 connector. вЂ“ provides high speed UART communications with Tech 2Д¬ANdi adapterВ connects the Tech II by way of the existing Data Link Connector (DLC) Burndy Connector. вЂ“ support simultaneous communications on three CAN buses The primary function of the CANdi module is to add CAN capability to theВ Tech 2 scan tool. Still use a OBDII connector but the Candi module is needed to read the data on the CAN Network. Corvettes 2005 and newer use the CAN Network.

The CANDI module reads the CAN Network on cars that have it. W hat is the real purpose of the candi module?

#Gm tech 2 clone equivalent software#

This allows the existing Tech 2 software to be used with no changes, whether or not the CANdi module is installed. That is, unless the Tech 2 enables features specific to the CANdi module. The module powers up in a way that makes it transparent to the user. Installed, the CANdi module is fully backward compatible with current tester functionality. The Controller Area Network Diagnostic Interface (CANdi) is an in-cable module that works with the existing Tech 2 components including the VCI, cables and adapters. TheВ CANdi module connects between the Tech 2вЂ™s diagnostic link cable and the OBD adapter. In order to perform diagnostics on a vehicle that uses the CAN interface, you will need the Tech 2 and a CAN diagnostic interfaceВ module. What is the real purpose of the candi module?ДЄn industry change in protocol from OBD II to Controller Area Network (CAN) is ongoing.

#Gm tech 2 clone equivalent manual#

Why do you need a CANdi module for Tech 2?Д¬ANdi adapter user manual for GM Tech 2 clone scanner: